Features mod:
-revitalizes the gauges (speedometer, tachometer (now arrow moves more smoothly), gasoline);
-revitalizes the steering wheel;
-Working wipers;
-Working turn signals and back up (there are light sources, as well as the light falls on the adjacent machines and people)
including trailers;
-fully working universal joints (there is an option to sync with both front and rear wheels), with lively Sling
change the angle of the crossbar;
-brake caliper (rotate with the wheels, but, as expected, does not spin);
-running tie rods;
-fans in the engine (speed of rotation depends on the oborotv of the engine), you can create 2 fan. instead of a second
crankshaft pulley do fan for example;
-rotating mežsekcionnyj drive, as in "Ikaruse" with an accordion;
-rulâŝie rims in the back section of the "Ikarus";
-You can create ahead of another bridge with rulâŝimi wheels;
-You can create back podrulivaûŝuû axle, as on some buses, the angles are calculated based on the dimensions of the model;
-the ability to create a fully functioning hydraulic dump trucks, including trailers;
-steady turn wheels on cars of class "worker";
-the ability to customize the car speedometer, tachometer (sizing, pointer, maximum lift janitors and
the helm;
-transfer case (polnoprivodnikah);
-You can raise the truck cabin type "KAMAZ".
Control (the default):
-"K"-wipers;
-"J"-switch off the engine;
-"B"-Handbrake (clicked one time, and he kept boxed. pressing cleared);
-"P"-hook/unhook the trailer (the machine must be in touch with trailer);
-"Z"-left povortnik on/off;
-"X"-the hazard lights on/off;
-"C"-right pan/tilt on/off;
-"9"-reduced (on/off at a speed of less than 5 km/h);
-"0"-front-wheel drive;
-'-'-all-wheel drive;
-"="-rear-wheel drive;
"num8"-standing near the car lift cabin;
' num2 '-omit the cabin standing next to the car;
"num8"/"num2"-raise/lower body (behind the wheel to sit). You can do any car truck. If the tipper-dumper,
the use of hydraulics lift lower body num7/num1;
-"incert"/"delete"-raise/lower the left glass;
-"pageup"/"pagedown"-raise/lower right glass;
-"/" num9 num3 "-raise/lower sloth (standing at axis);
-"num4/num6"-open/close vorotinu (standing at the door of the body).
Crane Control:
-"num8"/"num2"-raise/lower arrow;
-"num4/num6-rotate an arrow;
-"/" num7 num9 "-push/slide the arrow;
-"num1"/"num3"-to release/remove support;
-"num num" + "/"-wind up/unwind steering.
Author: izerli
Author`s site: www.libertycity.ru
Comments (36)